diff options
Diffstat (limited to 'vimwiki/Set up DHCP or static IP Address from CLI.md')
| -rw-r--r-- | vimwiki/Set up DHCP or static IP Address from CLI.md | 52 |
1 files changed, 52 insertions, 0 deletions
diff --git a/vimwiki/Set up DHCP or static IP Address from CLI.md b/vimwiki/Set up DHCP or static IP Address from CLI.md new file mode 100644 index 0000000..96a88d8 --- /dev/null +++ b/vimwiki/Set up DHCP or static IP Address from CLI.md @@ -0,0 +1,52 @@ +This guide will show how to setup DHCP or static IP address from command line. +For full details see [the blackmoreops site:](https://www.blackmoreops.com/2015/03/26/setup-dhcp-or-static-ip-address-from-command-line-in-linux/) + +1. STOP and START Networking service + + `# /etc/init.d/networking stop` + + `# /etc/init.d/networking start` + + In systems using systemd, then use the following instead: + `# systemctl stop network.service` + + `# systemctl start network.service` + +2. STOP and START Network-Manager + `# systemctl stop NetworkManager.serviced` + + `# systemctl start NetworkManager.serviced` + +3. Bring up network interface + `# ifconfig eth0 up` + + or + + `ifup eth0` + + At this point the interface doesn't have an IP address + assigned as can be checked by the following command: + + `# ifconfig eth0` + +4. Setting up IP Address via DHCP + `# echo "iface eth0 inet dhcp >> /etc/network/interfaces"` + + and then bring up the interface as in previous step. + +5. Setting up Static IP + `# ifconfig eth0 192.168.43.226` + `# ifconfig eth0 netmask 255.255.255.0` + `# ifconfig eth0 broadcast 192.168.43.255` + ` route add default gw 192.168.43.1 eth0` + +6. Alternative way of setting up Static IP + `# echo -e “iface eth0 inet dhcp\n address 10.1.1.2\n netmask 255.255.255.0\n gateway 10.1.1.1″>>/etc/network/interfaces` + +7. Fix missing Default Gateway + `# ping 8.8.8.8` + +8. Setting up Nameserver/DNS + `# echo “nameserver 8.8.8.8\n nameserver 8.8.4.4″ >>/etc/resolv.conf` + + |