Added the relevent parts of the .config directory. Alss add ssh config

1 files changed, 71 insertions, 0 deletions

diff --git a/vimwiki/Wifi Networking CLI.md b/vimwiki/Wifi Networking CLI.md
new file mode 100644
index 0000000..b117dad
--- /dev/null
+++ b/vimwiki/Wifi Networking CLI.md
@@ -0,0 +1,71 @@
+[#](#) Connect to wifi network from command line in linux #
+
+For full article see [the blackmoreops site:](https://www.blackmoreops.com/2014/09/18/connect-to-wifi-network-from-command-line-in-linux/)
+
+1. Find Available Wifi adapters.
+
+    `# iw dev`
+
+2. Check Device Status.
+
+   Check to see if the adapter is up/down.
+
+   `# ip link show DEVICE_NAME`
+
+   (where DEVICE_NAME is wlan0, eth0 etc).
+   Look for the word UP inside the brackets in the first line of output
+
+3. Bring up the Wifi interface.
+
+    `# ip link set wlan0 up`
+
+    You can check the device status again as in step 2.
+
+4. Check the connection status.
+
+    `# iw wlan0 link`
+
+5. Scan to Find the Wifi network.
+
+    `# iw wlan0 scan`
+
+6. Generate a wpa/wpa2 config file.
+
+    `# wpa_passphrase WIFI-SSID >> /etc/wpa_supplicant.conf`
+    `# networkpassword`
+
+7. Connect to wifi network.
+
+    Once there is a configuration file it can be used to connect to the network.
+
+    `# wpa_supplicant -B -D wext -i wlan0 -c /etc/wpa_supplicant.conf`
+
+        where -B means run in background
+              -D specifies the the wireless driver (wext is generic wireless driver).
+
+    You can then check connection status as in step 4.
+
+8. Get an IP using dhclient.
+
+    `# dhclient wlan0`
+
+    IP address can then be vewrified with:
+
+    `ip addr show wlan0` or `ifconfig wlan0`
+
+    Then we check that we have the proper routing rules.
+
+    `ip route show`
+
+    If we need to add routing manually:
+
+    `ip route add default via 10.0.0.138 dev wlan0`
+
+9. Test connectivity.
+
+    Ping google to check connectivity.
+
+    `# ping 8.8.8.8`
+
+
+